Series F4 Process Controller

Brand: Watlow

The SERIES F4 1⁄4 DIN temperature process controller offers performance features to meet a wide range of industrial processing needs. 

The F4 process controller is ideal for semiconductor manufacturing equipment, plastics processing and packaging equipment and industrial process control applications. 

This process controller features a four line, high definition LCD interface display, in addition to an information key that enables easy set up and control operation, minimizing the chance for error. 

Its 16-bit microprocessor ensures accuracy and delivers performance advantages you can count on from a Watlow controller. 

Four digital inputs remotely modify controller operation or enable display of pre-defined operator messages. Advanced process controller features include cascade, ratio, differential, duplex slide wire and retransmit options.
Features
  • Guided setup
  • High definition four-line LCD display
  • Information “I” Key
  • Customized menuing
  • High performance 16-bit microprocessor
  • Universal input
  • Modbus® communications ready

Specifications

Brand

Universal Analog Inputs 1 (2 and 3 Optional)

  • Update rates, IN1 = 20 Hz, IN2 and IN3 = 10 Hz

Thermocouple

  • Type J, K, T, N, C (W5), E, Pt 2, D (W3), B, R, S

RTD

  • 2- or 3-Wire platinum, 100, 500, or 1KΩ
  • JIS or DIN curves, 1.0 or 0.1 indication

Process

  • Input resolution ≈ 50,000 bits at Full Scale
  • Range selectable: 0-10 Vdc, 0-5 Vdc, 1-5 Vdc, 0-50 mV, 0-20 mA, 4-20 mA
  • Voltage input impedance 20KΩ
  • Current input impedance 100 Ω

Digital Inputs (4)

  • Update rate = 10 Hz
  • Contact or dc voltage, 36 Vdc max
  • 10KΩ input impedance

Control Outputs (1A, 1B)

  • Update rate = 20 Hz

Open Collector/Switched dc

  • Internal load switching (nominal): Switched dc, 22 to 28 Vdc, limited @ 30 mA
  • External load switching Max.: Open collector 42 Vdc @ 0.5 A

Solid-State Relay

  • Zero switched, optically coupled, 0.5A @ 24 Vac min., 253 Vac Max.

Electromechanical Relay

  • Form C, 2A @ 250 Vac or 30 Vdc max
  • Resistive or inductive load
  • Without contact suppression

Process Outputs (Optional Retransmit)

  • Update rate = 1 Hz
  • User-selectable 0-10 Vdc, 0-5 Vdc, 1-5 Vdc @ 1KΩ min., 0-20 mA, 4-20 mA @ 800 Ω Max.

Resolution

  • dc ranges = 2.5 mV nominal
  • mA ranges = 5 µA nominal

Calibration Accuracy

  • dc ranges = ± 15 mV
  • mA ranges = ± 30 µA
  • Temperature stability 100 ppm/°C

Alarm Outputs

  • Output update rate 1 Hz
  • Electromechanical relay, Form C, 2A @ 30 Vdc or 240 Vac Max.

Communications

  • EIA-232 and EIA-485 serial communications with Modbus RTU protocol

Safety and Agency Approvals

  • UL/C-UL 916 listed, File # E185611 Process Control Equipment
  • NEMA 4X and IP65

Terminals

  • Touch-safe, removable terminal blocks, accepts 12 to 22-gauge wire

Power

  • 100-240 Vac, -15 %, +10 %, 50/60 Hz, ± 5 %
  • 39 VA Max. power consumption
  • Data retention upon power failure via non-volatile memory. Sensor input isolation from input to input to output to communication circuitry is 500 Vac

Operating Environment

  • 32 to 149° F (0 to 65° C)
  • 0 to 90 % Relative Humidity, Non-Condensing
  • Storage temperature: -40 to 158° F (-40 to 70° C)

Accuracy

  • Calibration accuracy and sensor conformity: ± 0.1 % of Span ± 1° C @ 77° F ± 5° F (25° C ± 3° C) ambient, and rated line voltage ± 10 % with the following exceptions: Type T: 0.12 % of Span for -328 to -58° F (-200 to -50° C) Types R and S: 0.15 % of Span for 32 to 212° F (0 to 100° C) Type B: 0.24 % of Span for 1598 to 3092° F (870° C to 1700° C)
  • Accuracy span: less than or equal to operating ranges, 1000° F (540° C) min.
  • Temperature stability: ± 0.1° F/°F (± 0.1° C/°C) rise in ambient for thermocouples
  • ± 0.05° F/°F (± 0.05° C/°C) rise in ambient for RTD sensors

Displays

  • Process: 5-digit, 7 segment LED, Red
  • Control interface display: 4-Row, 20-character high definition LCD Green

show more