Images are representations only.
6221 2/2-Way Solenoid Valve
Brand: Burkert Fluid Control SystemsThe valves are based on a modular concept comprising three basic elements: Valve assembly, push-over coil and standard cable plug.
This valve is specifically designed for general-purpose applications with air. The design principle of this valve allows high pulsed operations in air pipe runs, where other general-purpose valves cannot be used, as they start to vibrate quickly. So life-time of this valve could be substantially increased, compared to other solutions.
A minimal pressure differential of psi: 14.5 (kPa: 100, bar: 1) is required for complete opening.
Features- High lifetime also under pulsed conditions
- Solutions for rough air applications
- High reliability
- Compact design with high flow rates
- Modular solenoid coil system different sizes and power ratings
- Low noise
- Easy coil change
- Coil can be locked in 4x 90º positions, or move freely between, as required
- Wide range of cable plug options Type 2508
Specifications
Ambient Temperature Range
- Maximum
Applications
- Compressed Air Circuits
- Fluids (Compressed Air Also with Higher Pulse Rates)
- Pneumatics Systems
BSP Connection
- G 1” Female
- G 1/2” Female
- G 3/4” Female
- G 3/8” Female
Cable Material
- Cable Plug: Polyamide
Consumption
- Power Consumption (AC): 14 VA / 8 W (Hold)
- Power Consumption (AC): 34-38 VA (Inrush)
- Power Consumption (DC): 10 W (Inrush & Hold)
Cycling Rate
- 0 to 20 cycles/minute
Duty Cycle
- 100 % Continuous Rating
Electrical Connectors
- Cable Plug DIN 43 650 A, 0-250 V
Electrical Contacts
- Normally Closed
Enclosure, Body Material
- Brass
Environmental Protection
- IP65 with Cable Plug
Flow Rate
- Air: 1,300 to 8,700 QNn (L/min)
Gasket Material
- PTFE
Materials of Construction
- Armature Guide Tube: 304 Stainless Steel, 1.4301
- Coil: Polyamide
- Plunger, Stopper: 430FR Stainless Steel (1.4105)
Mounting Position
- Preferably with Solenoid System Upright
O-Ring Material
- NBR
Operating Voltages
- 24 Vdc
- 24-230 Vac / 50 Hz
Orifice Size
- 0.39” to 0.78” (10 to 20 mm)
Piston Material
- Polyphenylene Sulfide
Pressure Range
- psi: 14.5 to 145 (kPa: 100 to 1,000, bar: 1 to 10)
Process Temperature
- -10° to 90° C (14° to 194° F)
Response Time
- Closing: 200 to 300 milliseconds
- Opening: 80 to 100 milliseconds
Seat / Seal Material
- Plunger Seal: NBR (Fluid: Compressed Air, Pulsed Air)
Solenoid Type
- 2/2-Way
Spring Material
- 301 Stainless Steel, 1.4310
Tolerance
- Voltages Tolerance: ± 10 %
- Pneumatic systems
- Compressed air circuits