MS03 Conductivity Sensor Cube

Brand: Burkert Fluid Control Systems
Does not ship to OH, United States

The device is a conductivity measurement sensor. It is used within the Online Analysis System Type 8905 by being plugged into a spare fluidic backplane slot. 

The conductivity of water follows in general the content of dissolved substances in the water. Not only the absolute value at each moment is an indicator for the continuity of the water quality, but quick changes in the conductivity may indicate unwanted change in the water. 

A rising or falling value can also be used as an indicator for process feedback in specific treatment steps. The device contains a 2-electrode sensor for resistive measurement of conductivity. The electrical and fluidic connections are made via the connection panel of the system. 

The sensor cube is communicating via buS, so the recognition at the Online Analysis System is fully automatic. When plugging into a system you will find the sensor in the list of buS members for further customized adjustments.
Features
  • Fully compatible with buS systems and a wide range of further analysis sensor cubes
  • Resistive 2-electrode sensor
  • Modular sensor cube for hot swap (exchange during operation)
  • Minimal sample water flow needed

Specifications

Ambient Temperature Range

  • Operating: 0° to 40° C (32° to 104° F)
  • Storage: -10° to 60° C (14° to 140° F)

Approvals & Certifications

  • CE
  • EU Directives
  • UL (C,US)

Consumption

  • Power: 0.8 VA

Enclosure, Body Material

  • Polyphenylene Ether (PPE)
  • Polystyrene (PS)

Environmental Protection

  • IP20
  • IP65

Flow Rate

  • Sample Water: > 6 L/hr

Humidity

  • < 90 % Relative Humidity, without Condensation

Indication

  • LED (According to NAMUR NE 107)

Linearity

  • ± 0.2 % of Full Scale

Materials of Construction

  • Lever: Polycarbonate (PC)

Measuring Error

  • Measurement Deviation: ± 2 % of Measured Value

Measuring Range

  • 50 to 1,000 µS/cm

Media

  • Water (4 to 9 PH)

Operating Voltages

  • 24 Vdc

Pressure Range

  • Sample Water - psi: 0 to 43.51 (kPa: 0 to 300, bar: 0 to 3)

Process Temperature

  • Sample Water: 3° to 40° C (37° to 104° F)

Repeatability

  • ± 0.2 % of Full Scale

Response Time

  • t90 < 5 seconds

RTD Type

  • Pt1000 Class B

Seat / Seal Material

  • Seal: EPDM

Sensor, Probe Type

  • Conductivity Sensor: Graphite 2-Electrode System

Temperature Range

  • 0° to 50° C (32° to 122° F)

show more