Images are representations only.
Series TSF-DF Thermocouple Limit Control
Brand: Dwyer Instruments, LLCThe Series TSF-DF Digital Thermocouple Limit Alarm is a UL approved temperature limit control that provides visual alarm status along with a relay output.
The Series TSF-DF controls have a built in reset button on the front panel or can accept an external reset signal. Program settings on model TSF-DF controls cannot be changed through the buttons on the device.
It is necessary to purchase a model TSF-MDF and a model TS2-K in addition to the model TSF-DF. Desired program parameters are entered on a TSF-MDF programming control.
Using the TS2-K configuration key, the parameters can be easily copied from the TSF-MDF and transferred to the TSF-DF Limit Alarms.
Features- UL Approved Limit Control
Specifications
Accuracy
- ± 1 % of Full Scale
Ambient Temperature Range
- 0° to 60° C (32° to 140° F)
Approvals & Certifications
- CE
- cUR
- UR
Consumption
- 4 VA at 230 Vac
Display
- 1/2” Digits
- 3-Digit, Red, Plus Sign
Electrical Rating
- 1 hp
Environmental Protection
- IP64
Input
- J, K, or S Thermocouple
Power Requirement
- 115 Vac
- 230 Vac
- 24 Vac
- 24 Vdc
Resolution
- 1°
Storage Temperature
- -20° to 80° C (-4° to 176° F)
Switch Type
- NO SPST Relay - 16 A Resistive at 240 Vac
Temperature Range
- 0° to 700° C (32° to 1292° F) - Thermocouple J Typical
- 0° to 999° C (32° to 1830° F) - Thermocouple K or S Typical
- Gas Fired Oven and Burner Control