Images are representations only.
2836 2/2-Way Solenoid Control Valve
Brand: Burkert Fluid Control Systems
The direct-acting solenoid control valve, Type 2836, works as an electromagnetically actuated control valve in applications with relatively high flow rates. The valve is normally closed.
Valve control takes place through the control electronics of Type 8605, which converts an Analog input signal into a PWM² (pulsewidth modulation) signal.
Features- Direct-acting, normally closed
- DN 0.11" to 0.47" (3 to 12 mm)
- Port connection 1/2” or 3/4”
Specifications
Ambient Temperature Range
- 55° C (131° F) - Max.
Approvals & Certifications
- CE
BSP Connection
- G 1/2” Female
- G 3/4” Female
Consumption
- Power: 24 W, Max.
Current
- Coil Current: 1,100 mA - Max.
Duty Cycle
- 100 % Duty Cycle Continuous Rating
Electrical Connectors
- Cable Plug Typical 2508 According to DIN EN 175301-803 Form A
Electrical Contacts
- Normally Closed
Enclosure, Body Material
- Brass
- Stainless Steel
Environmental Protection
- IP65
Flow Rate
- 270 to 2,700 QNn (L/min)
- Water: 0.25 to 2.5 Kvs (m³/hour)
Frequency
- PWM Frequency: 150 to 180 Hz
Hysteresis
- < 5 %
Media
- Neutral Gases & Liquids
Mounting Position
- Preferably with Actuator Upright
NPT Connection
- 1/2” NPT Female
- 3/4” NPT Female
Operating Pressure
- psi: 0 to 362.6 (kPa: 0 to 2,500, bar: 0 to 25) - Max.
Orifice Size
- 0.11” to 0.47” (3 to 12 mm)
Power Supply
- 24 Vdc
Pressure Range
- psi: 0 to 362.6 (kPa: 0 to 2,500, bar: 0 to 25) - Overpressure with Respect to Atmospheric Pressure
Process Temperature
- -10° to 90° C (14° to 194° F)
Ratio
- Span - 1:25
Repeatability
- < 1 % of Full Scale
Seat / Seal Material
- Seal: FKM
Sensitivity
- < 0.5 % of Full Scale
Solenoid Type
- 2/2-Way
Viscosity
- 21 mm²/sec (21 cSt) - Max.