Images are representations only.
Type 590X Manifold Mount I/P Transducer
Brand: ControlAirThe Type-590X Manifold Mount I/P Transducer converts a variable electrical signal to a low flow proportional pneumatic output.
Its compact size, light weight and immunity to shock and vibration make it ideal for use in process control valve positioned applications.
Conversion technology utilizing open loop control and a low mass magnet produces accurate pressure control at an economical cost. The Type-590X can mount in any position and is impervious to RFI/EMI interference.
Features- Small Size Allows for dense mounting in panels
- Vibration and Position Insensitive Unit can mount in any plane and is stable in high vibration environments
- Worldwide Safety Approvals Factory Mutual (FM), Canadian Standards Association (CSA) and ATEX Intrinsically Safe and Non-Incendive certifications
- Manifold Mounting Inlet and outlet ports or a common surface
- Wide Operating Temperature Limits
Specifications
Brand
Input
- 4-20 mA
Output Range
- 6-30 psig (0.40-2.0 bar)
- 3-27 psig (0.20-1.8 bar)
- 3-15 psig (0.20-1.0 bar)
Air Consumption at 85 psig (5.9 bar) Supply
- 4.94 scfh
Maximum Supply Pressure
- 150 psig (10 bar)
Flow Capacity at 150 psig (10.3 bar) Supply
- 8.36 scfh (4.18 Nl/min)
Relative Humidity
- 75 % Average - 95 % Short Time Non-Condensing
Impedance
- 260 ohms @ 70° F (21° C)
Loop Load
- 5.2 volts @ 70° F (26° C)
Linearity (Independent)
- < + 0.5 % of Span
Hysteresis
- < + 0.3 % of Span
Deadband
- < + 0.1 % of Span
Repeatability
- < + 0.3 % of Span, < + 0.15 % of Span Typical
Mounting Orientation
- < + 0.5 % / 90° change
Air Supply Sensitivity
- < + 0.75 % / 10° F (12° C) Change
Housing
- NEMA 1 (IP20)
Port Size
- 3/16” NPT (M - Connection)
Electrical Connection
- Terminal block
Mounting
- Manifold
Materials (Body)
- Plastic
- Aluminum
Materials (Other)
- Stainless Steel
- Buna-N
- Zinc-Plated Steel
- Polypropylene