0290 2/2-Way Diaphragm Solenoid Valve

Brand: Burkert Fluid Control Systems
Does not ship to Ohio, United States

The 0290 valve is a servo-assisted solenoid valve of the S.EV series. The valve opens without differential pressure. 

The opening process is supported by the fixed coupling of the diaphragm to the plunger. In the process, the integrated soft-kick function opens in a manner that is gentle on the material.

Various diaphragm material combinations are available depending on the application. The housing offered is rounded out by a stainless steel and grey cast iron version. The solenoid coils are moulded with a chemically resistant epoxy.

Kick and drop electronics are moulded into all DC variants for reduced electrical power consumption. 

In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65 - in combination with a stainless steel housing NEMA 4X.
Features
  • Servo-assisted diaphragm with diameter of up to DN 50
  • Hard-coupled diaphragm opens without differential pressure
  • Vibration-proof, block screwed coil system
  • Damped design for quiet closing
  • Energy-saving power reduction in all DC versions

Specifications

Ambient Temperature Range

  • Maximum

Approvals & Certifications

  • CSA
  • UL
  • UR

BSP Connection

  • G 1” Female
  • G 1/2” Female
  • G 1-1/2” Female
  • G 1-1/4” Female
  • G 2” Female
  • G 3/4” Female

Consumption

  • Power Consumption (AC): 100-120 VA (Inrush)
  • Power Consumption (AC): 25 VA / 10 W (Hold)
  • Power Consumption (AC): 32 VA / 16 W (Hold)
  • Power Consumption (UC): 30-100 W (Inrush)
  • Power Consumption (UC): 6-30 W (Hold)

Diaphragm Material

  • Diaphragm Support Disc: 316 Stainless Steel, 1.4401
  • Diaphragm Support Disc: Brass (CuZn37)
  • EPDM
  • FKM
  • NBR

Duty Cycle

  • 100 % Continuous Cycle

Electrical Connectors

  • Cable Plug for Ø 7 mm Cable, According to DIN EN 175301-803 Form A

Electrical Contacts

  • Normally Closed

Enclosure, Body Material

  • 316Nb Stainless Steel, 1.4581
  • Brass

Environmental Protection

  • IP65
  • IP66
  • NEMA 4X

Flange Size - 1-1/2” (DN 40)

  • 1-1/2” (DN 40) - PN 16 (DIN 2501)

Flange Size - 1-1/4” (DN 32)

  • 1-1/4” (DN 32) - PN 16 (DIN 2501)

Flange Size - 1” (DN 25)

  • 1” (DN 25) - PN 16 (DIN 2501)

Flange Size - 2” (DN 50)

  • 2” (DN 50) - PN 16 (DIN 2501)

Flow Rate

  • Water: 1.8 to 38 Kv (m³/hour)

Insulation

  • Coil Insulation Class H

Internal Part Material

  • Valve: 304 Stainless Steel, 1.4301
  • Valve: 430FR Stainless Steel (1.4105)
  • Valve: Brass

Materials of Construction

  • Coil: Epoxy
  • Guide Tube: 305 Stainless Steel, 1.4303
  • Stopper, Magnetic Core: 430FR Stainless Steel (1.4105)

Mounting Position

  • Preferably with Actuator Upright

Orifice Size

  • 0.47” to 1.96” (12 to 50 mm)

Pressure Range

  • psi: 0 to 232.1 (kPa: 0 to 1,600, bar: 0 to 16)

Process Temperature

  • EPDM: -30° to 120° C (-22° to 248° F)
  • FKM: 0° to 120° C (32° to 248° F)
  • NBR: -10° to 80° C (14° to 176° F)

Response Time

  • Closing: 700 to 4,000 milliseconds (Pressure Decay 100 To10 %)
  • Opening: 100 to 1,000 milliseconds (Pressure Build-Up 0 to 90 %)

Ring Material

  • Shading Ring: Copper - Brass, AC Version
  • Shading Ring: Silver - Stainless Steel, AC Version

Seat / Seal Material

  • Pilot Seat & Nippel: 316 Stainless Steel, 1.4401
  • Pilot Seat & Nippel: Brass (CuZn39Pb3)
  • Seal: EPDM (Media: Oil & Fat Free Media, Hot Water)
  • Seal: FKM (Media: Per Solutions, Hot Oils)
  • Seal: NBR (Media: Neutral Media, Compressed Air, Water, Hydraulic Oil)

Solenoid Type

  • 2/2-Way

Spring Material

  • 301 Stainless Steel, 1.4310

Tolerance

  • Voltage Tolerance: ± 10 %

Voltage

  • 0 to 24 V/UC/DC
  • 24-110 V / 50 Hz

show more