Images are representations only.
8054/8055 Full Bore Magmeter
Brand: Burkert Fluid Control SystemsDoes not ship to OH, United States
The complete full bore magflowmeter Type 8054/8055, which consists of a magnetic sensor fitting Type S054 or S055 connected to an electronics Type SE56 (blind in compact version or with display in compact or remote version), is designed for applications with liquids with a minimum conductivity of 5 µS/cm.
Combined with a valve as the actuating element, the complete full bore magflowmeter Type 8054/8055 can control high-precision dosing operations and flow measurements in potable water treatment and waste water treatment.
Features- Combination of magflowsensor fitting S054 or S055 and electronics SE56
- Continuous measurement or Batch Control
- Version without (S054) or with (S055) flanges
- For water treatment and general-purpose applications
Displaying prices & availability for Ohio, United States 43201 in USD. Change location.
Models matching criteria: 1
Out of Stock
Specifications
Applications
- Water Treatment
Approvals & Certifications
- CE
- EN 1092-1
Cable Length
- Remote Version (S055), Electrode Cable, Coil Cable: 10 metres
Conductivity
- 20 µS/cm Min. with Demineralized Water
- 5 µS/cm Min.
Diameter
- Pipe: 1 to 8" (DN 25 to DN 200)
Electrical Connectors
- 2 Cable Glands PG9
- Junction Box
Enclosure, Body Material
- 304 Stainless Steel
- 316 Stainless Steel
- Carbon Steel Painted
Environmental Protection
- IP65
- IP67
- IP68
Flange Size - 1-1/2” (DN 40)
- 1-1/2" (DN 40) - 150# ANSI
Flange Size - 1-1/4” (DN 32)
- 1-1/4" (DN 32) - 150# ANSI
Flange Size - 1” (DN 25)
- 1" (DN 25) - 150# ANSI
Flange Size - 2-1/2” (DN 65)
- 2-1/2" (DN 65) - 150# ANSI
Flange Size - 2” (DN 50)
- 2" (DN 50) - 150# ANSI
Flange Size - 3” (DN 80)
- 3" (DN 80) - 150# ANSI
Flange Size - 4” (DN 100)
- 4" (DN 100) - 150# ANSI
Flange Size - 5” (DN 125)
- 5" (DN 125) - 150# ANSI
Flange Size - 6” (DN 150)
- 6" (DN 150) - 150# ANSI
Flange Size - 8” (DN 200)
- 8" (DN 200) - 150# ANSI
Flow Rate
- 20,000 gpm (100,000 L/minute, 5,000 m³/hour)
- Maximum
- Minimum 0 to 0.4 m/sec: 0 to 45.20 m³/hour
Materials of Construction
- Electrode: 316L Stainless Steel
- Electrode: Hastelloy C
- Electrode: Platinum Rhodium
- Electrode: Tantalum
- Electrode: Titanium
- Lining: Ebonite
- Lining: Polypropylene (PP) - Max.
- Lining: PTFE
Measuring Range
- 0 to 1,130 m³/hour
Pressure Range
- bar: 0 to 63.98
- kPa: 0 to 6,398
- psi: 0 to 928
Process Temperature
- With PP Lining: 0° to 60° C (32° to 140° F)
- With PTFE Lining: -20° to 130° C (-4° to 266° F)
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
- Potable water treatment and waste water treatment