8030 In-Line Flowmeter

Brand: Burkert Fluid Control Systems
Does not ship to OH, United States

The paddle wheel flowmeter for continuous flow measurement is especially designed for use in neutral, slightly aggressive, solid free liquids. 

The flowmeter is made up of a compact fitting (S030) and an electronic module (SE30) quickly and easily connected together by a QuarterTurn. The Burkert designed fitting system ensures simple installation of the devices into all pipes from DN06 to DN65. 

The flowmeter produces a frequency signal, proportional to the flow rate, which can easily be transmitted and processed by a Burkert transmitter/controller.
Features
  • Economic integration in pipe systems without any additional piping
  • 3-wire frequency pulse version to directly interface with PLC’s (both PNP and NPN)
  • Connection to Burkert devices in remote versions

Models matching criteria: 1
Out of Stock
Does not ship to OH, United States

Specifications

Ambient Temperature Range

  • Operating & Storage: -15° to 60° C (5° to 140° F)

Approvals & Certifications

  • EN ISO 5167-1
  • EMC EN 61000-6-2, 61000-6-3
  • PED 97/23/CE

Bearing Material

  • Ceramics

Cable Length

  • Maximum

Consumption

  • Current (Hall “Low Power” Version): ≤ 0.8 mA
  • Current (Hall Version): ≤ 30 mA

Cover Material

  • Polycarbonate (PC)

Diameter

  • Pipe: 1/4 to 2-1/2” (DN06 to DN 65)

Duty Cycle

  • Output: 1/2 ± 10 %

Electrical Connectors

  • 1.5 mm², Max.
  • Cable Plug EN 175301-803
  • Shielded Cable

Enclosure, Body Material

  • Polycarbonate (PC)

Environmental Protection

  • IP65

Frequency

  • Output: 0 to 300 Hz

Humidity

  • ≤ 80 % Relative Humidity, Non-Condensing

Linearity

  • ± 0.5 % of Full Scale

Materials of Construction

  • Male Fixed Connector: Polycarbonate (PC)

Measuring Error

  • Standard K-factor: ± 2.5 % of Reading
  • Teach-In: ± 1 % of Reading

Measuring Range

  • 0.3 to 10 m/sec

Operating Voltages

  • 12-36 Vdc Filtered & Regulated

Output

  • Hall “Low Power” Version: 10 mA - Max.
  • Hall Version (NPN): 0.2-36 Vdc
  • Hall Version: 100 mA - Max.

Pipe Connection

  • DN 15 Pipe
  • DN 20 Pipe
  • DN 25 Pipe
  • DN 32 Pipe
  • DN 40 Pipe
  • DN 50 Pipe
  • DN 65 Pipe

Plug Material

  • Cable Plug: Polyamide (PA)

Power Supply

  • 12-36 Vdc

Pressure Range

  • bar: 0 to 16
  • kPa: 0 to 1,600
  • psi: 0 to 232.16

Process Temperature

  • PP: 0° to 80° C (32° to 176° F)
  • PVC: 0° to 50° C (32° to 122° F)
  • Stainless Steel, Brass, PVDF: -15° to 100° C (5° to 212° F)

Repeatability

  • ± 0.4 % of Reading

Reverse Polarity Protection

  • Yes

Screw Material

  • Stainless Steel

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM
  • Seal: NBR

Shock

  • EN 60068-2-27

Switch Type

  • Hall Version (NPN & PNP), Hall “Low Power” Version (NPN): Transistor

Tri-Clamp Connection

  • DN 15 Tri-Clamp
  • DN 20 Tri-Clamp
  • DN 25 Tri-Clamp
  • DN 32 Tri-Clamp
  • DN 40 Tri-Clamp
  • DN 50 Tri-Clamp
  • DN 65 Tri-Clamp

Vibration

  • EN 60068-2-6

Viscosity

  • 300 cSt, Max.

Voltage

  • Dielectric Strengh: 2,300 Vac

Welded Connection

  • DN 15 Weld End
  • DN 20 Weld End
  • DN 25 Weld End
  • DN 32 Weld End
  • DN 40 Weld End
  • DN 50 Weld End
  • DN 65 Weld End

Wetted Materials

  • Axis: Ceramics
  • Fitting, Sensor Armature, Paddle Wheel: PVDF
  • Fitting, Sensor Armature: 316L Stainless Steel, 1.4404
  • Fitting, Sensor Armature: Brass
  • Fitting, Sensor Armature: Polypropylene (PP)
  • Fitting, Sensor Armature: PVC

Documentation

show more