Images are representations only.
8030 In-Line Flowmeter
Brand: Burkert Fluid Control Systems
The paddle wheel flowmeter for continuous flow measurement is especially designed for use in neutral, slightly aggressive, solid free liquids.
The flowmeter is made up of a compact fitting (S030) and an electronic module (SE30) quickly and easily connected together by a QuarterTurn. The Burkert designed fitting system ensures simple installation of the devices into all pipes from DN06 to DN65.
The flowmeter produces a frequency signal, proportional to the flow rate, which can easily be transmitted and processed by a Burkert transmitter/controller.
Features- Economic integration in pipe systems without any additional piping
- 3-wire frequency pulse version to directly interface with PLC’s (both PNP and NPN)
- Connection to Burkert devices in remote versions
Displaying prices & availability for Ohio, United States in USD. Change location.
Models matching criteria: 1
Out of Stock
Does not ship to OH, United States
Specifications
Ambient Temperature Range
- Operating & Storage: -15° to 60° C (5° to 140° F)
Approvals & Certifications
- EN ISO 5167-1
- EMC EN 61000-6-2, 61000-6-3
- PED 97/23/CE
Bearing Material
- Ceramics
Cable Length
- Maximum
Consumption
- Current (Hall “Low Power” Version): ≤ 0.8 mA
- Current (Hall Version): ≤ 30 mA
Cover Material
- Polycarbonate (PC)
Diameter
- Pipe: 1/4 to 2-1/2” (DN06 to DN 65)
Duty Cycle
- Output: 1/2 ± 10 %
Electrical Connectors
- 1.5 mm², Max.
- Cable Plug EN 175301-803
- Shielded Cable
Enclosure, Body Material
- Polycarbonate (PC)
Environmental Protection
- IP65
Frequency
- Output: 0 to 300 Hz
Humidity
- ≤ 80 % Relative Humidity, Non-Condensing
Linearity
- ± 0.5 % of Full Scale
Materials of Construction
- Male Fixed Connector: Polycarbonate (PC)
Measuring Error
- Standard K-factor: ± 2.5 % of Reading
- Teach-In: ± 1 % of Reading
Measuring Range
- 0.3 to 10 m/sec
Operating Voltages
- 12-36 Vdc Filtered & Regulated
Output
- Hall “Low Power” Version: 10 mA - Max.
- Hall Version (NPN): 0.2-36 Vdc
- Hall Version: 100 mA - Max.
Pipe Connection
- DN 15 Pipe
- DN 20 Pipe
- DN 25 Pipe
- DN 32 Pipe
- DN 40 Pipe
- DN 50 Pipe
- DN 65 Pipe
Plug Material
- Cable Plug: Polyamide (PA)
Power Supply
- 12-36 Vdc
Pressure Range
- bar: 0 to 16
- kPa: 0 to 1,600
- psi: 0 to 232.16
Process Temperature
- PP: 0° to 80° C (32° to 176° F)
- PVC: 0° to 50° C (32° to 122° F)
- Stainless Steel, Brass, PVDF: -15° to 100° C (5° to 212° F)
Repeatability
- ± 0.4 % of Reading
Reverse Polarity Protection
- Yes
Screw Material
- Stainless Steel
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
- Seal: NBR
Shock
- EN 60068-2-27
Switch Type
- Hall Version (NPN & PNP), Hall “Low Power” Version (NPN): Transistor
Tri-Clamp Connection
- DN 15 Tri-Clamp
- DN 20 Tri-Clamp
- DN 25 Tri-Clamp
- DN 32 Tri-Clamp
- DN 40 Tri-Clamp
- DN 50 Tri-Clamp
- DN 65 Tri-Clamp
Vibration
- EN 60068-2-6
Viscosity
- 300 cSt, Max.
Voltage
- Dielectric Strengh: 2,300 Vac
Welded Connection
- DN 15 Weld End
- DN 20 Weld End
- DN 25 Weld End
- DN 32 Weld End
- DN 40 Weld End
- DN 50 Weld End
- DN 65 Weld End
Wetted Materials
- Axis: Ceramics
- Fitting, Sensor Armature, Paddle Wheel: PVDF
- Fitting, Sensor Armature: 316L Stainless Steel, 1.4404
- Fitting, Sensor Armature: Brass
- Fitting, Sensor Armature: Polypropylene (PP)
- Fitting, Sensor Armature: PVC