3275 2/2-Way Motor Valve

Brand: Burkert Fluid Control Systems
Does not ship to VA, United States

Type 3275 is a direct-acting and general-purpose motor valve for shut-off, used as regulating unit in control loops. A stepper motor as actuator drives the valve which is incorporated in a compact and robust housing.

The integrated electronics simplify the process integration; additional actuation modules are not necessary. 

The drive shaft shifts a very smooth ceramic disc over a second fixed ceramic disc. The fixed ceramic disc is simultaneously the valve seat. By turning the ceramic disc the valve opens. The seat tightness is achieved by the very smooth surface of the stacked ceramic discs.

In case of power failure the actual valve position will be kept. Therefore, this valve is not suitable as safety shut-off valve. If a specific safety position in case of power failure is required, this can be realized by using an external buffer module.

The motor’s power consumption in opened or closed position is nearly zero. This key feature can reduce the energy consumption of a plant dramatically and thus make it more efficient.

Specifications

Ambient Temperature Range

  • -10° to 60° C (14° to 140° F)

BSP Connection

  • G 1” Female
  • G 1/2” Female
  • G 3/4” Female

Consumption

  • Power: 1 W (Holding Position)
  • Power: 12 W, Max.

Cover Material

  • Fluid: Polyphenylene Sulfide (PPS)

Disc Material

  • Control, Fixed Seat: Ceramic

Duty Cycle

  • 100 % Duty Cycle (Depending on Fluid & Ambient Temperature)

Electrical Connectors

  • M12 Connector, 8-Pin, Male

Enclosure, Body Material

  • Fluid: Brass
  • Fluid: Stainless Steel
  • Valve: Polycarbonate (PC)
  • Valve: Polyphenylene Sulfide (PPS)

Environmental Protection

  • IP50

Flow Rate

  • 1.8 to 9.6 m³/hour (Kvs) - Water

Indication

  • LED

Input

  • 0-5 V (Log 0, Valve Closed)
  • 10-30 V (Log 1, Valve Open)

Media

  • Liquids
  • Neutral Gas

Mounting Position

  • Preferably with Actuator Upright

Nominal Pressure

  • psig: 87 (kPa: 600, bar: 6)

NPT Connection

  • 1” NPT Female
  • 1/2” NPT Female
  • 3/4” NPT Female

O-Ring Material

  • FKM
  • NBR

Orifice Size

  • 0.31” to 0.98” (8 to 25 mm)

Output

  • Load Capacity: 100 mA - Max.
  • Load Capacity: 10-30 V

Power Supply

  • 24 Vdc ± 10 %, Max.

Pressure Range

  • psi: 0 to 90 (kPa: 0 to 600, bar: 0 to 6) - Overpressure with Respect to Atmospheric Pressure

Process Temperature

  • Fluid Temperature: 0° to 70° C (32° to 158° F)

Response Time

  • Closure Time: 4 seconds

Seat / Seal Material

  • Ceramic
  • FKM
  • NBR

Shaft Material

  • Actuator: Stainless Steel

Shaft Seal Material

  • Actuator: FKM
  • Actuator: NBR

Spring Material

  • Stainless Steel

show more