Instrument Tubing Clamp

Channel-Track Single Line Clamps are precision manufactured from 316SS. All edges have been mechanically deburred to protect tubing from any damage.

These industry proven clamps provide a high strength, corrosion resistant means by which to secure single runs of instrument tubing in an orderly fashion. Packaged in quantities of 50 per bag.

Channel-Track Duplex Line Clamps are constructed of high strength, temperature and corrosion resistant 316SS.

These precision manufactured clamps offer an easy, positive clamping action that secures two evenly spaced instrument tubing lines simultaneously.

All sharp edges have been mechanically deburred to eliminate any possible damage to coated tubing. Packaged in quantities of 50 per bag.

Channel-Track Gang Clamps are precision engineered devices that gather together from two (2) to twenty (20) tubes.

With their construction of 316SS, these clamps offer a versatile and efficient, high strength, corrosion resistant method of organizing multiple runs of tubing.

They are mechanically deburred to eliminate any sharp edges which could be damaging to coated tubing. Packaged in quantities of 25 per bag.

Channel-Track Yoke Clamps are designed for use in our perforated angle and channel.

These clamps offer a positive clamping action for one (1) to four (4) tubes abreast, and can be used for stacking multiple rows of tubing for optimum space efficiency.

Used with a carriage bolt and wing nut assemble, they provide a fast easy installation. They are precision manufactured from 316SS for maximum corrosion resistance and strength.

Precision manufactured Solid Stainless Spacer Clamps are designed to provide either two or three directional retention of two (2) tubes.

The clamp for 3/16” o.d. to 1/2” o.d. tubes can be mounted in either 2” wide channel as manufactured by Channel-Track & TubeWay Industries, or in 2” x 2” angle.

The clamps for 5/8” o.d. and 3/4” tubes can be mounted in either 3”, 4”, or 6” channel manufactured by Channel-Track & TubeWay Industries.

These clamps are designed to meet the requirements of the ASME boiler & Pressure Vessel Code, Section III Division 1, Subsection NF.

Clamps can be supplied with Certificate of Compliance and/or Mill Test Reports.