8232 Chlorine Sensor

Brand: Burkert Fluid Control Systems
Does not ship to VA, United States

The Type 8232 from Burkert is an electrochemical sensor designed for the measurement of the free chlorine concentration generated from inorganic sources (chlorine gas, sodium hypochlorite,...). 

The Type 8232 offers a range of three models:
  • The chlorine sensor “Trace” (zero-chlorine) with three electrodes, is suitable for the measuring of chlorine at very low concentrations. The membrane of this sensor is less affected by biofouling. The sensor works in water without chlorine up to four weeks. It is available with a voltage output on a four-pin fixed connector
  • The chlorine sensor with three electrodes, has a sensor having a greatly reduced pH dependency. This model delivers a current output on a M12 connector and is designed to be used in a swimming pool, drinking or sea water. The fluid must contain a minimum chlorine concentration (≥ 0.1 ppm)
  • The chlorine sensor with two electrodes, delivers a current output on a M12 connector. It is designed to be used in swimming pool, drinking or process water. The fluid to be measured must not contain any surfactants or abrasive particles and its pH value must be at a constant level. The fluid must contain a minimum chlorine concentration (≥ 0.1 ppm)
Features
  • Chlorine sensor “Trace” with three electrodes for measuring at low concentrations
  • Chlorine sensor with three electrodes and greatly reduced pH dependency
  • Chlorine sensor with two electrodes for standard applications at constant pH

Specifications

Ambient Temperature Range

  • Operation & Storage (Electrolyte): 5° to 35° C (41° to 95° F)
  • Operation & Storage (Probe): 5° to 40° C (41° to 104° F)

Applications

  • Monitoring Absence of Chlorine in Reverse Osmosis Systems - Chlorine Sensor ”Trace”
  • Monitoring Chlorine (At Fluctuating PH - Chlorine Sensor with 3 Electrodes, at Constant PH - Chlorine Sensor with 2 Electrodes)

Approvals & Certifications

  • CE
  • EU Directives

Cap Material

  • Membrane Cap: PVC

Consumption

  • Current: 20 mA Approximately - Chlorine Sensor ”Trace”
  • Current: 4 mA Approximately, Max.

Electrical Connectors

  • 4-Pin Fixed Hermaphroditic Connector - Chlorine Sensor ”Trace”
  • 5-Pin M12 Connector (Male) - Chlorine Sensor with 3 Electrodes, Chlorine Sensor with 2 Electrodes
  • Screw Terminal

Flow Rate

  • Fluid: 15 to 30 L/hr

Humidity

  • < 90 % Relative Humidity, without Condensation

Loop Impedance

  • 50 ohms at 12 Vdc, Max.
  • 900 ohms at 30 Vdc, Max.

Materials of Construction

  • 316Ti Stainless Steel, 1.4571 - Chlorine Sensor ”Trace”, Chlorine Sensor with 3 Electrodes
  • Halide Reference Electrode: Silver
  • Membrane Holder: Stainless Steel
  • PVC - Chlorine Sensor ”Trace”
  • PVC-U - Chlorine Sensor with 3 Electrodes, Chlorine Sensor with 2 Electrodes
  • Working Electrode: Gold

Measuring Range

  • 0.005 to 2 ppm - Chlorine Sensor ”Trace”
  • 0.01 to 20 ppm - Chlorine Sensor with 3 Electrodes, Chlorine Sensor with 2 Electrodes

Media

  • Water (6.5 to 9 PH - Chlorine Sensor ”Trace”, 4 to 9 PH - Chlorine Sensor with 3 Electrodes, 6 to 8 PH - Chlorine Sensor with 2 Electrodes)

O-Ring Material

  • Sealing: NBR

Operating Voltages

  • 12-30 Vdc, Filtered & Regulated - Chlorine Sensor with 3 Electrodes, Chlorine Sensor with 2 Electrodes
  • 9-30 Vdc, Filtered & Regulated - Chlorine Sensor ”Trace”

Output

  • 4-20 mA - Chlorine Sensor with 3 Electrodes, Chlorine Sensor with 2 Electrodes
  • Analog: 0-2,000 mV, Max.

Pressure Range

  • psi: 0 to 14.5 (kPa: 0 to 100, bar: 0 to 1) - Max.
  • psi: 0 to 43.51 (kPa: 0 to 300, bar: 0 to 3) - Max.
  • psi: 0 to 7.25 (kPa: 0 to 50, bar: 0 to 0.5) - Max.

Process Temperature

  • 0° to 40° C (32° to 104° F) - Chlorine Sensor ”Trace”
  • 0° to 45° C (32° to 113° F) - Chlorine Sensor with 3 Electrodes, Chlorine Sensor with 2 Electrodes

Resolution

  • Sensor: 0.001 ppm - Chlorine Sensor ”Trace”
  • Sensor: 0.01 ppm - Chlorine Sensor with 3 Electrodes, Chlorine Sensor with 2 Electrodes

Response Time

  • t90: 120 seconds - Chlorine Sensor ”Trace”, Chlorine Sensor with 3 Electrodes
  • t90: 30 seconds - Chlorine Sensor with 2 Electrodes

Ring Material

  • Snap, Slide Ring: PETP

Shaft Material

  • PVC

  • Monitoring Chlorine (at Fluctuating PH - Chlorine Sensor with 3 Electrodes, at Constant PH - Chlorine Sensor with 2 Electrodes)
  • Monitoring Absence of Chlorine in Reverse Osmosis Systems - Chlorine Sensor "Trace"

Documentation

show more