6126 2/2 & 3/2-Way Rocker Solenoid Valve

Brand: Burkert Fluid Control Systems
Does not ship to VA, United States

The direct-acting rocker solenoid valve, Type 6126, is suitable for general applications in which compressed air, gases or slightly contaminated liquids are to be switched. The medium is in contact exclusively with the housing material and the FKM seals.

The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate.

The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.
Features
  • Valve with isolating diaphragm
  • Flexible design for custom manifold assemblies
  • High back pressure tightness, excellent cleanability and 100 % duty cycle
  • Normally closed, normally open and universal function

Specifications

Ambient Temperature Range

  • 55° C (131° F) - Max.

Applications

  • Dosing, Filling, Mixing Applications

BSP Connection

  • G 1/8” Female

Cable Length

  • 1.64 feet (0.5 Meter)

Consumption

  • Power: 3.4 W

Diaphragm Material

  • EPDM
  • FKM

Direct Mount

  • Yes

Duty Cycle

  • Continuous Rating 100 % Duty Cycle

Electrical Connectors

  • 2 FEP Flying Leads
  • Cable Plug

Electrical Contacts

  • Normally Closed
  • Normally Open

Enclosure, Body Material

  • Actuator, Fluid: Polyphenylene Sulfide (PPS)

Environmental Protection

  • IP40 with Rectangular Plug
  • IP65 with Flying Leads or Cable Plug

Flow Rate

  • 0.015 m³/hour (Kv) - Water
  • Air: 16 QNn (L/min)

Function

  • 3/2-Way Valve: Universal

Materials of Construction

  • Coil: Epoxide
  • Manifold: Aluminum
  • Manifold: Polyphenylene Sulfide (PPS)

Media

  • Resistant to Neutral Liquids & Gases

Mounting Position

  • Preferably with Actuator Upright

Operating Voltages

  • 12 Vdc
  • 24 Vdc

Orifice Size

  • 0.03” (0.8 mm)

Pressure Range

  • Vacuum - psi: 0 to 90 (kPa: 0 to 600, bar: 0 to 6)

Process Temperature

  • -10° to 55° C (14° to 131° F) - Temperature May Vary Depending on Orifice & Seal Material

Response Time

  • Opening, Closing: 25 Millisconds Approximately (Pressure Rise 0 to 10 %, 100 % to 10 %)

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM

Solenoid Type

  • 2/2-Way
  • 3/2-Way

Tolerance

  • Voltage: ± 10 %

Viscosity

  • 21 mm²/sec, Max.

  • Dosing, Filling, Mixing Applications

show more