2873 2/2-Way Solenoid Control Valve

Brand: Burkert Fluid Control Systems
Does not ship to VA, United States

The direct-acting solenoid control valve Type 2873 1.26" (32 mm installation width) is used as the regulating unit in control loops.

Due to an elastomeric seat seal the valve closes tight (integrated shut-off function), up to the DN specific nominal pressure. The plunger of the valve is assembled frictionless, which leads to an extraordinary adjustment characteristic.

This valve is particularly suitable for demanding control tasks (high control range, dry gases, etc.)

Valve control takes place through a PWM signal. The duty cycle of the PWM signal determines the coil current and hence the position of the plunger. Optionally the valve can also be driven with DC voltage.
Features
  • Very good response
  • Compact valve design
  • Excellent range (1:200)
  • Port connection 1/8” (3 mm), 1/4”(6 mm) or sub-base

Specifications

Ambient Temperature Range

  • 55° C (131° F) - Max.

Approvals & Certifications

  • ATEX - II 2 G EEx M II T4 & T5
  • DVGW
  • IECEx - Ex Mb E IIC T4, T5 Gb
  • UL
  • UR

BSP Connection

  • G 1/4” Female
  • G 1/8” Female

Consumption

  • Power: 9 W

Current

  • Maximum

Differential Pressure

  • psi: 0 to 116 (kPa: 0 to 800, bar: 0 to 8) - Max.

Duty Cycle

  • 100 % Duty Cycle Continuous Rating

Electrical Connectors

  • Cable Plug Typical 2508 According to DIN EN 175301-803

Electrical Contacts

  • Normally Closed

Enclosure, Body Material

  • Brass
  • Stainless Steel

Environmental Protection

  • IP65

Flow Rate

  • Water: 0.018 to 0.320 Kvs (m³/hour)

Frequency

  • PWM Frequency: 1,200 Hz

Hysteresis

  • < 5 %

Media

  • Neutral Gases & Liquids

Mounting Position

  • Preferably with Actuator Upright

Nominal Pressure

  • psi: 0 to 232 (kPa: 0 to 1,600, bar: 0 to 16)

NPT Connection

  • 1/4” NPT Female
  • 1/8” NPT Female

Orifice Size

  • 0.03” to 0.15” (0.8 to 4 mm)

Power Supply

  • 24 Vdc

Pressure Range

  • psi: 0 to 232.1 (kPa: 0 to 1,600, bar: 0 to 16)

Process Temperature

  • -10° to 90° C (14° to 194° F)

Ratio

  • Span - 1:200

Repeatability

  • Flow Measurement: < 0.5 % of Full Scale

Response Time

  • < 20 milliseconds (10-90 %)

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM

Sensitivity

  • Flow Measurement: < 0.25 % of Full Scale

Solenoid Type

  • 2/2-Way

show more