Images are representations only.
0121 2/2 & 3/2-Way Solenoid Valve
Brand: Burkert Fluid Control Systems
The 0121 valve is a direct-acting, media-separated pivoted armature valve. It is available in 3/2 and 2/2-way versions. As a 3/2-way version, it can be used as a distributor or mixing valve.
Various diaphragm material combinations and methods of operation are available depending on the application. The housing offering includes stainless steel (316L), PTFE, and PVC versions.
The solenoid coils are moulded with a chemically resistant epoxy. The 0121 is equipped with manual override for commissioning and testing.
For reduced energy requirements, all coils can be delivered with electronic power reduction or as an impulse version.
The switching status can be indicated with position feedback as a binary or NAMUR signal. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65/67 - in combination with a stainless steel or plastic housing NEMA 4X.
Features- Direct-acting, media-separated valve with diameter of up to DN 8
- Vibration-proof, block screwed coil system
- Service-friendly, durable manual override
- Explosion proof version
Specifications
Ambient Temperature Range
- Maximum
Approvals & Certifications
- CSA General-purpose Valve
- EPS 16-ATEX-1 111 X
- IEC Ex EPS 16.0049X
- Possible Conformity (Depending on Contruction): EAC, Drinking Water
- Possible Conformity (Depending on Contruction): FDA
- UL Recognized General-purpose Valve
BSP Connection
- G 1/4” Female
- G 3/8” Female
Consumption
- Power Consumption (Frequency (AC) Operation), (Frequency (DC) Warm): 8 W
- Power Consumption Frequency (AC): 15 VA (Operation)
- Power Consumption Frequency (AC): 30 VA (Inrush)
- Power Consumption Frequency (DC): 11 W (Cold)
- Power Consumption: 3 W (Operation) - Explosion-proofed Version
- Power Consumption: 40 W (Inrush) - Explosion-proofed Version
Current
- Maximum
Cycling Rate
- Maximum
Duty Cycle
- Duty Cycle for PVC: 10 % ED (10 Minute), 100 % ED for Version with High Capacity Electronic
- Duty Cycle for PVDF, PP & PTFE: 40 % ED (60 % Intermittent Operation) in 10 Minute for 8 W Version, 100 % ED for 5 W Version or High Capacity Electronic
- Duty Cycle for VA: 100 %
Electrical Connectors
- Cable Gland M20 x 1.5 - Explosion-proofed Version
- Tag Connector According to DIN EN 175301-803 Form A for Cable Plug Typical 2508/2509
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure, Body Material
- 316 Stainless Steel, 1.4401
- Polypropylene
- PTFE
- PVC (Resistant According to DIN 8062, 8061)
- PVDF
Environmental Protection
- Explosion-proof II 2 G Ex Mb IIC T4 Gb, II 2 D EX Mb IIIC T130° Db
- IP65 with Cable Plug
- IP66
- IP67
- NEMA 4X
Flow Rate
- 0.1 to 1 Kv (m³/hour)
Materials of Construction
- Coil: Epoxy
- Toggle Pin: PTFE
Mounting Position
- Preferably with Actuator Upright
NPT Connection
- Cable Gland 1/2”-14 NPT - Explosion-proofed Version
O-Ring Material
- FKM
Orifice Size
- 2” to 8” (50.8 to 203.2 mm)
Pressure Range
- Frequency AC (50/60 Hz) - psi: 0 to 90 (kPa: 0 to 600, bar: 0 to 6)
- Frequency DC - psi: 0 to 43.5 (kPa: 0 to 300, bar: 0 to 3)
Process Temperature
- PTFE or VA (EPDM, FKM, FFKM): -30° to 90° C (-22° to 194° F)
- PVC (EPDM, FKM, FFKM): -30° to 50° C (-22° to 122° F)
- PVDF or PP (EPDM, FKM, FFKM): -30° to 70° C (-22° to 158° F)
Response Time
- Closing: 40 milliseconds (Pressure Drops 100 to 10 %) - Explosion-proofed Version
- Frequency (AC) Closing (Pressure Drops 100 to 10 %), Frequency (DC) Opening (Pressure Rise 0 to 90 %): 11 milliseconds
- Frequency (AC) Opening: 20 milliseconds (Pressure Rise 0 to 90 %)
- Frequency (DC) Closing: 8 milliseconds (Pressure Drops 100 to 10 %)
- Opening: 30 milliseconds (Pressure Rise 0 to 90 %) - Explosion-proofed Version
Seat / Seal Material
- Seal: EPDM (Medium: Alkalis, Acids up to Medium Concentration, Alkaline Washing & Bleaching Lyes)
- Seal: FFKM (Medium: Aggressive Acids, Hot Air, Hot Oil, Aromatics, Ether, Esther, Ketones)
- Seal: FKM (Medium: Oxydizing Acids & Substances, Hot Oils with Additives, Salt Solutions, Waste Gases, Technical Vacuum)
- Seat: Polypropylene
- Seat: PTFE
- Seat: PVC
- Seat: PVDF
Solenoid Type
- 2/2-Way
- 3/2-Way
Tolerance
- Voltage Tolerance: ± 10 %
Viscosity
- Maximum
Voltage
- 110 V 50 Hz
- 12 Vdc
- 120 V 60 Hz
- 230 V 50 Hz
- 24 V 50 Hz
- 24 Vdc
- 240 V 60 Hz