300 Direct-Acting 3/2-Way Miniature Solenoid Valve

Brand: Burkert Fluid Control Systems
Does not ship to United States

Type 300 is available in a variety of different circuit functions, to suit the respective application.

When energized, the solenoid armature is drawn against a spring. The flow path through the valve is dependent upon the chosen circuit function.

The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.
Features
  • Body materials: brass, stainless steel
  • Short response times
  • Compact design
  • When de-energized, outlet port exhausted or pressurized, mixer valve

Specifications

Actuator Type

  • Direct-Acting

Ambient Temperature Range

  • Maximum

Applications

  • Gas Control, Welding Technology
  • Neutral Gases & Liquids
  • Pneumatic Control Equipment
  • Shut-Off, Dosing, Filling & Ventilating
  • Small Scale Instruments, Laboratory & Measuring Technology
  • Vacuum

BSP Connection

  • G 1/8” Female

Consumption

  • Power Consumption (AC Hold): 6 VA / 4 W
  • Power Consumption (AC Inrush): 9 VA
  • Power Consumption (DC): 4 W

Cycling Rate

  • 0 to 1,000 cycles/minute - Actuator

Duty Cycle

  • 100 % Continuous Rating, for Multiple Assembly Reduced Duty Cycle or Use 2 W Version on Request - Actuator

Electrical Connectors

  • Plug Connection without Cable Plug

Enclosure, Body Material

  • 303 Stainless Steel, 1.4305
  • Brass

Environmental Protection

  • With Cable Plug & Cable: IP65 - Actuator

Flow Rate

  • Air: 48 to 65 QNn (L/min) [Measured with bar: 6 Upstream Pressure & bar: 1 Pressure Drop Across the Valve at 20° C (68° F)]
  • Water: 0.045 to 0.060 Kv (m³/hour)

Metric Connection

  • M5

Mounting

  • Manifold

Mounting Position

  • Preferably with Solenoid System Upright

Operating Voltages

  • 12-24 Vdc
  • 24-240 V / 50 Hz
  • Battery Voltage: 24 V

Orifice Size

  • 0.047” to 0.062” (1.2 to 1.6 mm)

Pressure Range

  • psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10) [Also Suitable for Vacuum]

Response Time

  • Closing: 8 milliseconds
  • Opening: 12 milliseconds

Seat / Seal Material

  • Seal: EPDM (Fluids Handled: Oils & Fat-Free Fluids, Hot Water Alkaline Washing & Bleaching Lyes) - Valve
  • Seal: fpm (Fluids Handled: Hot Air, Oxygen, Per-Solutions, Hot Oils with Additves) - Valve
  • Seal: NBR (Fluids Handled: Neutral Fluids, Compressed Air, Town Gas, Water, Hydraulic Oil, Oils & Fat without Additives) - Valve
  • Seat: Brass

Solenoid Type

  • 3/2-Way

Temperature Range

  • EPDM: -40° to 90° C (-40° to 194° F)
  • FPM: -10° to 100° C (14° to 212° F)
  • NBR: -10° to 90° C (14° to 194° F)

Tolerance

  • Voltage Tolerance: ± 10 % - Actuator

Viscosity

  • Maximum

  • Neutral gases and liquids
  • Pneumatic control equipment
  • Vacuum
  • Shut-off, dosing, filling and ventilating
  • Gas control, welding technology
  • Small-scale instruments, laboratory and measuring technology

show more