8742 Mass Flow Controller & Flow Meter

Brand: Burkert Fluid Control Systems
Does not ship to OH, United States

Type 8742 can be configured either as MFC or MFM and is intended for the use in a büS or CANopen network. The büS network technology which is based on CAN physics was developed by Bürkert especially for applications with quite a number of control loops run by Industrial Ethernet or other fieldbuses.

The System Control Unit (SCU) Type ME2X (please see datasheet) transfers a customer’s PLC fieldbus into the proprietary büS communication and operates all connected electronic devices. 

The communication of the devices can be switched from büS to CANopen. Given that, Type 8742 can also be integrated into an existing CANopen infrastructure. 

Type 8742 measures (MFM) or controls (MFC) the mass flow of gases using a MEMS sensor. The sensor is in direct contact with the gas and therefore reaches very fast response times of a few hundred milliseconds.

Furthermore, the measurement is independent from pressure or temperature deviations. The MFC/MFM can be optionally calibrated for two different gases, the user is able to switch between them. 

A direct-acting solenoid control valve from Bürkert’s excellent 287x series as regulating unit ensures high sensitivity and good fl ow control of the device. Type 8742 is especially designed for use in harsh environments due to high IP and explosion protection.

Specifications

Accuracy

  • After 1 Minute Warm-Up Time: ± 0.3 % of Full Scale
  • After 1 Minute Warm-Up Time: ± 0.8 % of Reading

Ambient Temperature Range

  • -10° to 50° C (14° to 122° F)

Applications

  • Harsh Environments

Approvals & Certifications

  • ATEX Compliance II 3 G Ex NA IIC T Gc x & II 3D Ex Tc IIIC T °C Dc X

BSP Connection

  • G 1/4”

Communication

  • CAN Bus
  • Digital
  • Ethernet
  • FOUNDATION Fieldbus
  • USB

Consumption

  • Power Consumption: 1 W (as MFM)
  • Power Consumption: 3-10 W

Electrical Connectors

  • 5-Pin Connector
  • M12 Plug

Enclosure Finish

  • Aluminum Die Casting (Coated)

Enclosure, Body Material

  • Aluminum
  • Stainless Steel

Environmental Protection

  • Explosion-proof
  • Protection Class: IP65
  • Protection Class: IP67

Flow Rate

  • Control Valve: 0.00006 to 0.32 m³/hour (Kvs Value)
  • Nominal Flow Range: 0.01 to 80 LPM

Indication

  • Device Status: RGB-LED based on NAMUR NE107

Media

  • Air
  • Neutral Gasses

Mounting Position

  • Horizontal
  • Vertical

NPT Connection

  • 1/4” NPT

Operating Pressure

  • Maximum

Operating Voltages

  • 24 Vdc

Orifice Size

  • Control Valve: 0.05 to 4 mm

Principle of Operation

  • Thermal, Calorimetric

Process Temperature

  • -10° to 60° C (14° to 140° F) with Oxygen
  • -10° to 70° C (14° to 158° F)

Repeatability

  • ± 0.1 % of Full Scale

Response Time

  • Setting (MFC)/(MFM): < 300 milliseconds

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM

Sensor Circuit

  • Residual Ripple: ± 2 %

System Requirements

  • MS-Windows®

Tolerance

  • Voltage: ± 10 %

Turndown

  • 50:01:00
  • 100:01:00

  • Harsh Environments

show more