Images are representations only.
Series EPTA Electro-Pneumatic Transducer
Brand: Dwyer Instruments, LLC
The Series EPTA Electro-Pneumatic Transducers convert an analog input signal to a linearly proportionate pneumatic output by modulating its control valves to regulate branch line pressure to the set point determined by the input signal.
All models incorporate two low voltage valves, an integral in-barb filter, a 0 to 30 psi analog gage, an anodized aluminum manifold, and brass barbed fittings.
The EPTA offers adjustable span and offset as well as manual override. This unit has no air consumption and is immune to mounting orientation. Output pressure ranges include field-selectable 0 to 10, 0 to 15, and 0 to 20 psig.
Also included is an analog 0 to 5 VDC feedback signal indicating the resultant branch line pressure. Universal 24 VAC/24 VDC supply voltage and field-selectable 4 to 20 mA, 0 to 5 VDC, 0 to 10 VDC, or 0 to 15 VDC inputs ensure single unit compatibility with most systems.
The standard models maintain branch pressure on power loss while the Fail-Safe models will drop the branch pressure to 0 psi on power loss. Mounting configurations include a metal bracket mount in the EPTA-B models and a snap-track mount in the EPTA-S models.
The A-400 accessory kit will allow the EPTA-S models to be mounted on a standard DIN rail.
Features- Adjustable span and offset
- Manual override
- Field selectable output ranges
- Not position sensitive
Specifications
Brand
Accessories
- DIN Mounting Kit
Accuracy
- ± 1.0 % of Full Scale at Room Temprerature
- ± 2.0 % of Full Scale at 0° to 48.8° C (32° to 120° F)
Electrical Connectors
- One 14 AWG Per Terminal
- Plug-In Block Terminal Typical with 5 mm Pin Spacing
Flow Capacity
- 750 SCIM (1,274.25 m³/hour)
Humidity
- 5 to 95 % - Non-Condensing
Input Impedance
- 250 ohms - Current
Input Signal
- 0-10 Vdc
- 0 to 15 Vdc
- 0-5 Vdc
- 4-20 mA DC Current
Media
- Any Inert Gas
- Clean Dry Air
Operating Temperature
- 0° to 49° C (32° to 120° F)
Output
- 0-5 Vdc
- psig: 0 to 20 (kPa: 0 to 138, bar: 0 to 1.36)
Pressure Range
- bar: 0 to 1.36
- kPa: 0 to 137
- psig: 0 to 20
Sensor / Probe Diameter
- 1/4” O.D. - Pressure Connections (Polyethylene Tubing Optimum)
Storage Temperature
- -6.7° to 65.6° C (-20° to 150° F)
Supply Pressure - Maximum
- psig: 25 (kPa: 172, bar: 1.72)
Supply Voltage
- 24 Vac ± 10 % 50/60 Hz
- 24 Vdc ± 10 %
Tube Connection
- 1/4” Tube
- Operation of valve actuators, positioners, damper and louver actuators.