7615 Micro Dosing Unit

Brand: Burkert Fluid Control Systems
Does not ship to Virginia, United States

Burkert’s Micro Dosing Unit has been designed for precise dosing applications in the microliter range. It combines high dosing accuracy and precision with excellent chemical inertness.

The unit is comprised of three valves which can be opened simultaneously for flushing. Active inlet and outlet valves enable the device to pump liquid in two directions. This feature can be used to mix fluids inside a tube or channel or to constantly keep them in motion.

Reagents can be sucked back from the dispensing tip to prevent drying out after dosing. The integrated heating function heats up the valves and the media, and the unit comes along with dry running capabilities.

Specifications

Accuracy

  • Repetition: ± 2 % - at 20° C (68° F) Ambient Temperature, Medium Degassed DI Water, 5 Hz, No Back Pressure
  • Repetition: ± 2.5 %
  • Repetition: ± 5 %

Ambient Temperature Range

  • 10° to 55° C (50° to 131° F) - for Lower Temperature the Unit Can be Electrically Preheated

Applications

  • Analytical & Biomedical Applications
  • Dosing Applications in Medical
  • Lubricant Dosing
  • Pipetting of Liquids
  • Replacement of Syringe Pumps
  • Water Analysis

Consumption

  • Power (Short Term): 5 W
  • Power: 11 W

Cover Material

  • Polyphenylene Sulfide (PPS)

Duty Cycle

  • 100 % Duty Cycle

Electrical Connectors

  • Molex Plug

Enclosure, Body Material

  • PEEK

Environmental Protection

  • IP40

Frequency

  • Pump (Frequency Mode): 5 to 40 Hz

Materials of Construction

  • Ground Plate: Stainless Steel
  • Sub-Base Plate, Threaded Plate UNF 1/4”- 28”: PEEK

Media

  • Neutral & Aggressive Liquids

Output Pressure

  • Outlet (Relative Pressure) - psi: 14.5 (kPa: 100, bar: 1) - Max.

Process Temperature

  • EPDM: 5° to 60° C (41° to 140° F) - for Lower Temperature the Unit Can be Electrically Preheated
  • FFKM: 15° to 60° C (59° to 140° F)

Response Time

  • Length of Voltage Impulse (Impulse Mode): > 120 milliseconds

Screw Material

  • Stainless Steel

Seat / Seal Material

  • Seal: EPDM
  • Seal: FFKM

Switch Type

  • Rotary Switches

Tolerance

  • Voltage: ± 10 %

UNF/UNC Connection

  • 1/4”-28 UNF

Viscosity

  • < 250 mm²/sec, Max.

Voltage

  • 12 Vdc
  • 24 Vdc

  • Dosing applications in medical, analytical and biomedical applications
  • Replacement of syringe pumps
  • Pipetting of liquids
  • Water analysis
  • Lubricant dosing

Documentation

show more