6014 Banjo Direct-Acting 3/2-Way Plunger Valve

Brand: Burkert Fluid Control Systems
Does not ship to Virginia, United States

Valve 6014 is a direct-acting plunger valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application.

A Burkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. The coils are moulded with polyamide or with chemically resistant epoxy.

Pulse coils are available for the reduction of electrical power consumption during operation. Optional manual actuation enables quick commissioning and easy maintenance.

In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.

Specifications

Ambient Temperature Range

  • 55° C (131° F) - Max.

BSP Connection

  • G 1/4” Female
  • G 1/8” Female

Consumption

  • Power (DC Hot/Cold Coil): 8/9 W
  • Power: 17 VA [Hold AC (Hot Coil)]
  • Power: 24 VA (Inrush AC)
  • Power: 2-8 W
  • Power: 8 W [Hold AC (Hot Coil)]

Duty Cycle

  • Single Valve: 100 % Duty Cycle Continuous Rating

Electrical Connectors

  • Cable Plug
  • DIN EN 175301-803 Form A

Electrical Contacts

  • Normally Closed

Enclosure, Body Material

  • Flange: Brass
  • Flange: Polyamide
  • Stainless Steel
  • Valve: Aluminum

Environmental Protection

  • IP65 with Cable Plug
  • IP66
  • NEMA 4X with Cable Plug

Flow Rate

  • Air: 75 to 174 QNn (L/min)

Insulation

  • Coil Insulation: Class B
  • Insulation Class: Epoxy Class H

Materials of Construction

  • Armature Guide Tube: AISI 305 Stainless Steel, 1.4303
  • Coil: Epoxy - High Temperature Version
  • Coil: Polyamide (PA)
  • Stopper, Magnetic Core: AISI 430FR Stainless Steel (1.4105)
  • Sub Base: AISI 304 Stainless Steel, 1.4301
  • Sub Base: Steel (Surface Finish Thick Film Passivated)

Media

  • Compressed Air
  • Hydraulic Oil
  • Natural Gas
  • Neutral Gases & Fluids
  • Technical Vacuum
  • Town Gas
  • Water

Mounting Position

  • Preferably with Actuator Upright

Nut & Bolt Material

  • Lock Nut: Steel (Surface Finish Thick Film Passivated)

O-Ring Material

  • FKM
  • NBR

Operating Voltages

  • 230 Vac / 50 Hz
  • 24 Vac / 50 Hz
  • 24 Vdc

Orifice Size

  • 0.05” to 0.09” (1.5 to 2.5 mm)

Override

  • Manual Override

Pressure Range

  • psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10)

Process Temperature

  • Epoxy Coil: -10° to 120° C (14° to 248° F)
  • Polyamide Coil: -10° to 100° C (14° to 212° F)

Response Time

  • AC & DC (Opening, Closing): 10 to 22 milliseconds

Ring Material

  • Shading Ring: Copper (Cu) - Brass Version
  • Shading Ring: Stainless Steel (Ag) - Stainless Steel Version

Screw Material

  • AISI 304 Stainless Steel 1.4301
  • Brass (CuZn)

Seat / Seal Material

  • Armature Seal: FKM
  • Seal (Usit Ring): Aluminum
  • Seal (Usit Ring): NBR
  • Seal: EPDM

Solenoid Type

  • 3/2-Way

Spring Material

  • AISI 301 Stainless Steel 1.4310

Tolerance

  • Voltage: ± 10 %

Viscosity

  • 21 mm²/sec, Max.

show more