Images are representations only.
2610 2/2-Way Solenoid Valve
Brand: Burkert Fluid Control Systems
The direct-acting valve Type 2610 is delivered with circuit function normally closed.
The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature. In this way, condensation or an unacceptable heating up of the coil is avoided.
The supplied cable head contains a "kick and drop" electronic that supports the opening phase and afterwards reduction of the opening holding power.
Features- Medium separation
- Metal bellow system in stainless steel
- High quality PTFE seat seal
- Medium temperature: 200° to 180° C (-328° to 356° F)
- Energy saving "Kick and Drop" electronic
Specifications
Ambient Temperature Range
- Maximum
BSP Connection
- G 1/2” Female
- G 1/4” Female
Consumption
- Power Consumption: Kick & Drop Electronic 4 W (Operation)
- Power Consumption: Kick & Drop Electronic 72 W (Inrush)
Cycling Rate
- 10/Minute
Duty Cycle
- Continuous Operation 100 % ED
Electrical Connectors
- Cable Plug for Ø 7 mm Cable
Electrical Contacts
- Normally Closed
Enclosure, Body Material
- 316Nb Stainless Steel, 1.4581
- Brass
Environmental Protection
- IP65 with Cable Plug
Flow Rate
- Water: 0.8 to 1.8 Kv (m³/hour)
Materials of Construction
- Metal Bellows: 321 Stainless Steel (1.4541)
Media
- Neutral Gases & Liquids
Mounting Position
- Preferably with Actuator Upright
NPT Connection
- 1/2” NPT Female
- 1/4” NPT Female
Operating Voltages
- 24-230 V / UC
Orifice Size
- 0.236” to 0.472” (6 to 12 mm)
Pressure Range
- psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10)
Process Temperature
- -200° to 180° C (-328° to 356° F)
Response Time
- Closing: 300 to 500 milliseconds (Pressure Drop 100 to 10 %)
- Opening: 100 to 200 milliseconds (Pressure Rise 0 to 90 %)
Seat / Seal Material
- Seal: PTFE
- Seat: 316Nb Stainless Steel, 1.4581
Solenoid Type
- 2/2-Way
Tolerance
- Voltage Tolerance: Max.
Viscosity
- Approximately 21 mm²/sec