Images are representations only.
6106 3/2 Miniature Rocker Solenoid Valve
Brand: Burkert Fluid Control Systems
The direct-acting rocker solenoid valve type 6106 is especially designed for neutral gaseous mediums.
The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate.
The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.
Features- Direct–acting
- High cycling rate
- Reduced power consumption
- CNOMO and Burkert manifold interface
- Lubricated or non–lubricated dry air
Specifications
Ambient Temperature Range
- -10° to 55° C (14° to 131° F)
Applications
- Dosing Filling, Mixing Applications
Approvals & Certifications
- ATEX EEX I
- CE
- CSA
- UL
BSP Connection
- G 1/8”
Consumption
- Power: 1 W
- Power: 2 W
Cycling Rate
- 1,000 cycles/minute
Direct Mount
- Yes
Duty Cycle
- 100 % Duty Cycle - Continious Rating
Electrical Connectors
- Cable Plug Typical 2506: Tag Connector Sidewards According to DIN EN 175301-803 (Previous DIN 43650) Form C
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure, Body Material
- Polyamide (PA)
Environmental Protection
- IP20 with Tag Connector
- IP65 with Cable Plug
Materials of Construction
- Manifold: Aluminum
Media
- Compressed Air
- Neutral Gases
- Technical Vacuum
Mounting Position
- Preferably with Actuator Upwards
Operating Voltages
- 12 V
- 24 Vdc
Orifice Size
- 0.03” to 0.04” (0.9 to 1.2 mm)
Pressure Range
- Vacuum - psi: -116 to -145 (kPa: -800 to -1,000, bar: -8 to -10)
Process Temperature
- -10° to 55° C (14° to 131° F)
Response Time
- Opening, Closing: 25 Millisconds Approximately (Pressure Rise 0 to 10 %, 100 % to 10 %)
Seat / Seal Material
- Seal: FKM
Solenoid Type
- 3/2-Way
Tolerance
- Voltage: ± 10 %
- Dosing Filling, Mixing Applications