6106 3/2 Miniature Rocker Solenoid Valve

Brand: Burkert Fluid Control Systems
Does not ship to Virginia, United States

The direct-acting rocker solenoid valve type 6106 is especially designed for neutral gaseous mediums.

The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate.

The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.
Features
  • Direct–acting
  • High cycling rate
  • Reduced power consumption
  • CNOMO and Burkert manifold interface
  • Lubricated or non–lubricated dry air

Specifications

Ambient Temperature Range

  • -10° to 55° C (14° to 131° F)

Applications

  • Dosing Filling, Mixing Applications

Approvals & Certifications

  • ATEX EEX I
  • CE
  • CSA
  • UL

BSP Connection

  • G 1/8”

Consumption

  • Power: 1 W
  • Power: 2 W

Cycling Rate

  • 1,000 cycles/minute

Direct Mount

  • Yes

Duty Cycle

  • 100 % Duty Cycle - Continious Rating

Electrical Connectors

  • Cable Plug Typical 2506: Tag Connector Sidewards According to DIN EN 175301-803 (Previous DIN 43650) Form C

Electrical Contacts

  • Normally Closed
  • Normally Open

Enclosure, Body Material

  • Polyamide (PA)

Environmental Protection

  • IP20 with Tag Connector
  • IP65 with Cable Plug

Materials of Construction

  • Manifold: Aluminum

Media

  • Compressed Air
  • Neutral Gases
  • Technical Vacuum

Mounting Position

  • Preferably with Actuator Upwards

Operating Voltages

  • 12 V
  • 24 Vdc

Orifice Size

  • 0.03” to 0.04” (0.9 to 1.2 mm)

Pressure Range

  • Vacuum - psi: -116 to -145 (kPa: -800 to -1,000, bar: -8 to -10)

Process Temperature

  • -10° to 55° C (14° to 131° F)

Response Time

  • Opening, Closing: 25 Millisconds Approximately (Pressure Rise 0 to 10 %, 100 % to 10 %)

Seat / Seal Material

  • Seal: FKM

Solenoid Type

  • 3/2-Way

Tolerance

  • Voltage: ± 10 %

  • Dosing Filling, Mixing Applications

show more