Images are representations only.
Series TE-I Immersion Temperature Sensor
Brand: Dwyer Instruments, LLC
The Series TE-I Immersion Style Temperature Sensors accurately measure water temperature inside chilled and hot water loops in HVAC systems.
Thermowells are required to protect the electrical connection from the process water and to allow replacement of the sensors without draining the system.
Features- 1/4 turn housing cover with chain to prevent dropping
- Multiple conduit knockouts for easy installation positioning
- Integral 1/2" NPSM connection for direct mounting to a thermowell
- General purpose or weatherproof enclosure options
- Terminal connection eliminates need for wire nuts
Specifications
Brand
Accuracy
- ± 0.15° C at 0° C (± 0.28° F at 32° F) - RTD DIN Class A
- ± 0.22° C (± 0.4° F) at 25° C (77° F) - Thermistor
Approvals & Certifications
- GOST-R
Electrical Connectors
- 4” Flying Leads Terminal Block
Enclosure, Body Material
- 94 V-O Polycarbonate Plastic
Environmental Protection
- IP66
- NEMA 4X
Insertion 'U' Length
- 12” (30 cm)
- 18” (46 cm)
- 2.5” (6.4 cm)
- 4” (10.1 cm)
- 6” (15.2 cm)
- 8” (20.3 cm)
Materials of Construction
- 304 Stainless Steel - Thermowell Material
Mounting
- Immersion Mount
Operating Temperature
- -40° to 150° C (-40° to 302° F)
Sensor / Probe Diameter
- 1/4” O.D.
Sensor / Probe Type
- RTD - Pt100 ohms, PT1,000 ohms
- Thermistor - 10 kiloohms Typical II, 10 kiloohms Typical III, 3 kiloohms, 20 kiloohms
- Chiller or Boiler Loops
- Building Automation