AFV Wet Pit Pump

Brand: Flowserve Corporation

The Flowserve AFV axial flow suspended shaft vertical pump is a single stage propeller type design.

This family of pumps is specifically designed for low head movement of water for a multitude of municipal, agricultural and industrial services.
  • Three- Or Four-Vane Axial Flow Propeller Is Hydraulically Balanced Via Pressure Equalizing Balance Holes And A Top Propeller Hub Wear Ring To Reduced Axial Down Thrust.
  • Outer Flanged Columns Are Bolted Together With Through Bolts For Ease In Assembly.
  • Alignment Is Maintained Via Centering Fits On All Parts.
  • Flared Suction Bell Provides A Smooth Waterway Entrance To The Impeller And Has Integral Splitters To Reduce Inlet Swirl And Entrance Losses.
  • Stator Case With Integral Diffuser Vanes May Be Either A Single-Piece Casting Or A Fabrication.
  • Discharge Elbow may be located above or below ground and at any outlet orientation.
  • Seal Chamber Accepts Packing Or Mechanical Seal To Suit Service Requirements.



  • Low Lift

Operating Parameters

  • Flows to 181 700 m³/hour (800,000 gpm)
  • Heads to 11 m (35 ft)
  • Speeds to 1770 rpm

Size Range

  • Settings to 8 M (25 Ft)
  • Sizes 200 mm (8”) to 3.1 M (123”)


show more