Type 590X Manifold Mount I/P Transducer

Brand: ControlAir

The Type-590X Manifold Mount I/P Transducer converts a variable electrical signal to a low flow proportional pneumatic output.

Its compact size, light weight and immunity to shock and vibration make it ideal for use in process control valve positioned applications.

Conversion technology utilizing open loop control and a low mass magnet produces accurate pressure control at an economical cost. The Type-590X can mount in any position and is impervious to RFI/EMI interference.
Features
  • Small Size Allows for dense mounting in panels 
  • Vibration and Position Insensitive Unit can mount in any plane and is stable in high vibration environments 
  • Worldwide Safety Approvals Factory Mutual (FM), Canadian Standards Association (CSA) and ATEX Intrinsically Safe and Non-Incendive certifications 
  • Manifold Mounting Inlet and outlet ports or a common surface 
  • Wide Operating Temperature Limits

Specifications

Brand

Input

  • 4-20 mA

Output Range

  • 6-30 psig (0.40-2.0 bar)
  • 3-27 psig (0.20-1.8 bar)
  • 3-15 psig (0.20-1.0 bar)

Air Consumption at 85 psig (5.9 bar) Supply

  • 4.94 scfh

Max. Supply Pressure

  • 150 psig (10 bar)

Flow Capacity at 150 psig (10.3 bar) Supply

  • 8.36 scfh (4.18 Nl/min)

Relative Humidity

  • 75 % Average - 95 % Short Time Non-Condensing

Impedance

  • 260 ohms @ 70° F (21° C)

Loop Load

  • 5.2 volts @ 70° F (26° C)

Linearity (Independent)

  • < + 0.5 % of Span

Hysteresis

  • < + 0.3 % of Span

Deadband

  • < + 0.1 % of Span

Repeatability

  • < + 0.3 % of Span, < + 0.15 % of Span Typical

Mounting Orientation

  • < + 0.5 % / 90° change

Air Supply Sensitivity

  • < + 0.75 % / 10° F (12° C) Change

Housing

  • Nema 1 (IP20)

Port Size

  • 3/16" NPT (M - Connection)

Electrical Connection

  • Terminal block

Mounting

  • Manifold

Materials (Body)

  • Plastic
  • Aluminum

Materials (Other)

  • Stainless Steel
  • Buna-N
  • Zinc-Plated Steel
  • Polypropylene
Show More