Type 330 Air Filter Regulator

Brand: ControlAir

The Type 330 Series of Air Filter Regulator are designed to provide clean, accurate air pressure to instruments, valves, and other automatic control equipment in a lightweight, compact housing.

These quality instruments are constructed of durable materials that will provide long lasting corrosion resistance in harsh industrial environments.

The Type 330 Filter Regulator is designed for use in systems that require clean, accurate instrument air, the Type-330 provides pressure regulation and filtration in an integral compact package.

Available in ¼" NPT porting for normal operation and ½" NPT porting for high flow capacity requirements.

The Type 330 Filter Regulator with Automatic Drain automatically flushes out condensate waste liquid when a change in air flow occurs or when the supply pressure is reduced.

The low maintenance Automatic Drain helps prolong the life of the regulator and filter by preventing corrosion on the bottom of the regulator and reducing the load of the filter.
Features
  • Compact and Light Weight Construction 
  • High Flow Capacity 
  • Low Air Consumption 
  • Rugged, Corrosion Resistant Design 
  • Pressure Range: psig: 0 to 120 (bar: 0 to 8, kPa: 0 to 827) 
  • Supply Pressure (Maximum):
    • Manual Drain: psig: 250 (bar: 17, kPa: 1,723) 
    • Auto Drain: psig: 150 (bar: 10, kPa 1,034) 
  • Temperature Range: 
    • Manual Drain: -18° to 71°C (0° to 160°F) 
    • Auto Drain: 0°C to 71°C (32° to 160°F) 
    • Low Range: -40° to 51°C (-40° to 125°F) 
  • Port Size: 1/2", 1/4" 
  • Port Threads: NPT 
  • Materials of Construction:
    • Body & Housing: Diecast Aluminum Alloy, Irridite, Baked Epoxy Finish 
    • Diaphragms: Nitrile Elastomer and Nylon Fabric 
    • Filter: Polyethylene 

2 models matching criteria
Out of Stock
Out of Stock

Specifications

Brand

Actuator Type

  • Knob
  • Screw

Air Consumption

  • > 5 scfh

Diaphragm Material

  • Nitrile
  • Nylon Fabric

Enclosure Finish

  • Baked Epoxy

Enclosure, Body Material

  • Die Cast Aluminum

Exhaust Capacity - Relieving Units Only

  • 0.1 scfm (2.83 Nl/minute) with Downstream Pressure psig: 5 (bar: 0.3, kPa: 30) Above Set Point

Filter

  • Polyethylene (40 microns)
  • Polyethylene (5 microns)

Flow Capacity

  • 0.5 Cv at psig: 150 (bar: 10.3, kPa: 1,034) Supply & psig: 80 (bar: 5.5, kPa: 551) Set Point
  • 2.5 Cv at psig: 150 (bar: 10.3, kPa: 1,034) Supply & psig: 80 (bar: 5.5, kPa: 551) Set Point

Media

  • Air
  • Inert Gas
  • Sweet Natural Gas

Mounting

  • Body Direct
  • Bracket
  • Pipe

NPT Connection

  • 1/2” NPT Female
  • 1/4” NPT Female

Operating Temperature

  • -40° to 71° C (-40° to 160° F)

Pressure Range

  • bar: 0 to 8
  • kPa: 0 to 827
  • psig: 0 to 120

Sensitivity

  • 1” WC (2.54 cm)

Supply Pressure - Maximum

  • bar: 10 to 17
  • kPa: 1,034 to 1,724
  • psig: 150 to 250

Supply Pressure Effect

  • Less than psig: 0.25 (bar: 0.017, kPa: 1.7) for psig: 25 (bar: 1.7, kPa: 172) Change
  • Less than psig: 0.5 (bar: 0.035, kPa: 3.4) for psig: 25 (bar: 1.7, kPa: 172) Change

Vent

  • Straight
  • Tapped Exhaust

show more