6228 2/2-Way Diaphragm Solenoid Valve

Brand: Burkert Fluid Control Systems
Does not ship to OH, United States

The Type 6228 is a servo-assisted 2/2-way solenoid valve with servo-diaphragm. It is particularly suited for neutral media.

Without electrical power, this solenoid valve is closed. Pressure builds up through the servo diaphragm, which pushes the latter downwards and thereby keeps the valve closed.

On switching, the space above the servo-diaphragm will be relieved via the pilot valve. As a result, the pressure of the medium lifts the servo-diaphragm, and the main valve opens.

A minimum differential pressure of psi: 7.252 (kPa: 50, bar: 0.5) is required for complete opening and closing. The special design and geometry of the internal parts of the valve produce a soft closing function with very low pressure peaks only. It is very simple to extend the valve radially.
Features
  • Push-over solenoid system
  • Energy-saving AC07 coil, maximum DN 13
  • Body in plastic

Specifications

Ambient Temperature Range

  • 0° to 50° C (32° to 122° F)

BSP Connection

  • G 1/2” Female
  • G 3/8” Female

Consumption

  • Power Consumption (AC): 6 VA (Operation)
  • Power Consumption (AC): 9 VA (Pick Up)
  • Power Consumption (DC): 4 W (Pick Up, Operation)

Cover Material

  • Polyamide
  • Polyphenylene Ether (PPE)

Diaphragm Material

  • Diaphragm Support: Brass
  • Diaphragm Support: Polyphenylene Sulfide (PPS)
  • EPDM
  • FPM
  • NBR

Duty Cycle

  • 100 % Continuous Rating

Electrical Connectors

  • Electrical Coil Connection According to DIN 43650 Form B (Industrial Standard) Cable Plug Typical 2507
  • Electrical Coil Connection According to DIN EN 175301-803 Form C (DIN 43650) Cable Plug Typical 2516 / 2510

Electrical Contacts

  • Normally Closed

Enclosure, Body Material

  • Plastic
  • Polyamide (PA)
  • Polyphenylene Ether (PPE)

Environmental Protection

  • IP65 with Cable Plug

Flow Rate

  • Water: 1.8 to 3.2 Kv (m³/hour)

Internal Part Material

  • Valve: Mild Steel (Ms)
  • Valve: Polyphenylene Sulfide (PPS)

Materials of Construction

  • Coil (DIN 43650 B): Epoxy
  • Coil (DIN EN 175301-803 C²): Polyamide (PA)
  • Core: 430FR Stainless Steel (1.4105)

Media

  • Compressed Air
  • Hydraulic Oil
  • Oils
  • Water

Mounting Position

  • Preferably with Actuator Upright

NPT Connection

  • 1/2” NPT Female
  • 3/8” NPT Female

Nut & Bolt Material

  • Bolts: 316 Stainless Steel, 1.4401
  • Nut: Steel (9SMnPb28K)

O-Ring Material

  • EPDM
  • FPM
  • NBR

Operating Voltages

  • 24 Vdc
  • 24-230 V / 50/60 Hz

Orifice Size

  • 0.393” to 0.511” (10 to 13 mm)

Pressure Range

  • psi: 7.252 to 145 (kPa: 50 to 1,000, bar: 0.5 to 10)

Process Temperature

  • EPDM: -10° to 50° C (14° to 122° F)
  • NBR, FPM: 0° to 50° C (32° to 122° F)

Response Time

  • Closing: 150 to 300 milliseconds (Pressure Relief 100 to 10 %)
  • Opening: 30 to 60 milliseconds (Pressure Build-Up 0 to 90 %)

Ring Material

  • Shading Ring: Copper

Seat / Seal Material

  • Seal: EPDM
  • Seal: FPM
  • Seal: NBR

Solenoid Type

  • 2/2-Way

Spring Material

  • 301 Stainless Steel, 1.4310

Tolerance

  • Voltage Tolerance: ± 10 %

Tube Connection

  • 1/2” Tube
  • 3/8” Tube

show more