Images are representations only.
300 Series Pressure Regulator
Brand: ControlAirThe Type-300 Instrument Air Filter Regulator is designed to provide clean, accurate air pressure to instruments, valves, and other automatic control equipment.
This filter regulator has been proven to provide accurate operating characteristics under variable conditions. Durable materials and a standard epoxy paint finish provide long lasting corrosion resistance in harsh industrial environments.
The Type-300 is a quality unit that is ideal as an economical alternative for control of process applications.
The Type-310 NACE Filter Regulator incorporates all of the operating features of the Type-300 filter regulator, but is constructed of materials that meet NACE specification #MR-01-75 for sulfide stress cracking.
Designed specifically for corrosive sour gas environments, the Type-310 NACE is ideal for oil field applications.
The Type-320 Filter unit is a 40-micron depth filter that removes dirt, moisture and other particles from air and gas lines. Robustly constructed of die-cast aluminum with a baked epoxy finish, this unit stands up in corrosive operating conditions.
This filter is an economical alternative for air supply line applications that don't require a pressure reducing regulator.
Features- Corrosion-Resistant and NACE Compliant Construction
- Types 300 and 320 feature Aluminum die-castings, finished with irridite and baked epoxy. Materials in the Type 310 meet NACE MR-01-75 requirements.
- Depth Filter
- Units come equipped with high capacity 40 micron depth filter housed in dripwell
- Two Outlet Connections
- Provides piping versatility
- Stable Output and Repeatability
- Provides constant control under variable flow rates and supply pressures
- Low Droop At High Flow Levels
- Aspirator design helps maintain set pressure at higher flow levels
- Tight Shutoff
- A soft, rubberized valve provides a positive shutoff and compensates for dirt and other foreign matter
- Low Air Consumption
- Decreases operating cost
- Tapped Exhaust
- Allows captured exhaust
- Set Point Range: psig: 0 to 120 (bar: 0 to 8, kPa: 0 to 826)
- Supply Pressure (Maximum): psig: 250 (bar: 17, kPa: 1,723)
- Ambient Temperature: -40° to 82°C (-40° to 180°F)
- Port Size: 1/4"
- Port Thread: NPT
- Material of Construction:
- Body & Housing: Diecast Aluminum Alloy, Irridite and Baked Epoxy Finish
- Filter: Phenolic Impregnated Cellulose
- Elastomers: Nitrile, Viton
- Trim: Heat Treated Plated Steel, Stainless Steel
Specifications
Brand
Air Consumption
- > 5 scfh
- None - Typical 320 Only
Approvals & Certifications
- ATEX
Diaphragm Material
- Nitrile
- Viton
Enclosure, Body Material
- Die Cast Aluminum
Exhaust Capacity - Relieving Units Only
- 0.1 scfm at psig: 100 (bar: 6.9, kPa: 689.5) Supply with psig: 20 (137.9 kPa, 1.4 bar) Output
- None - Typical 320 Only
Filter
- Phenolic Impregnated Cellulose (40 microns)
- Phenolic Impregnated Cellulose (5 microns)
Flow Capacity
- Typical 300: 22 scfm at psig: 100 (bar: 7.0, kPa: 700) System Pressure
- Typical 310: 20 scfm at psig: 100 (bar: 7.0, kPa: 700) System Pressure
- Typical 320: 30 scfm at 100 psig (7.0 bar, 700 kPa) System Pressure
Flow Rate
- 0.4 Cv
Media
- Air
Mounting
- Bracket
- Panel Mount
- Pipe
NPT Connection
- 1/4” NPT Female
Pressure Range
- bar: 0 to 8.2
- kPa: 0 to 827
- psig: 0 to 120
Relief
- Non-Relieving
- Relieving
Sensitivity
- 1” WC (2.54 cm)
- None - Typical 320 Only
Supply Pressure - Maximum
- bar: 17.2
- kPa: 1,723
- psig: 250
Supply Pressure Effect
- > psig: 0.2 (bar: 0.01, kPa: 1.3) for psig: 25 (bar: 1.7, kPa: 172.4) Change
- None - Typical 320 Only
Temperature Range
- -40° to 82° C (-40° to 180° F)
Trim Material
- Heat Treated-Plated Steel
- Stainless Steel
Vent
- Standard
- Tapped Exhaust