6223 Proportional Valve with Control Electronics

Brand: Burkert Fluid Control Systems
Does not ship to OH, United States

The valve, Type 6223, can be used to control the flow of large amounts of liquids. Low hysteresis, high repeatability and good response sensitivity guarantee good positioning behavior. 

The valve closes tight. The push-over coil is easy to replace.
Features
  • Control valve for continuous control of liquids
  • Low hysteresis and high repeatability
  • Control with PWM signal
  • Servo-assisted, tight closing valve

Specifications

Ambient Temperature Range

  • 55° C (131° F) - Max.

Approvals & Certifications

  • CE

BSP Connection

  • G 1” Female
  • G 1/2” Female
  • G 3/4” Female
  • G 3/8” Female

Consumption

  • Power: 8-15 W

Current

  • Maximum

Duty Cycle

  • 100 % Duty Cycle Continuous Rating

Electrical Connectors

  • Cable Plug Typical 2508 According to DIN EN 175301-803 Form A

Electrical Contacts

  • Normally Closed

Enclosure, Body Material

  • Brass
  • Stainless Steel

Environmental Protection

  • IP65 with Plug-On Module or with Cable Plug on the Valve

Flow Rate

  • 1,510 to 5,400 QNn (L/min)
  • Water: 1.4 to 5 Kvs (m³/hour)

Hysteresis

  • < 5 %

Media

  • Neutral Liquids

Mounting Position

  • Preferably with Actuator Upright

Operating Voltages

  • 24 Vdc

Orifice Size

  • 0.39” to 0.78” (10 to 20 mm)

Pressure Range

  • psi: 7.252 to 145 (kPa: 50 to 1,000, bar: 0.5 to 10)

Process Temperature

  • -10° to 90° C (14° to 194° F)

Ratio

  • Span - 1:10

Repeatability

  • < 1 % of Full Scale

Response Time

  • Settling Time (90 %): < 200 milliseconds

Seat / Seal Material

  • Seal: FKM

Sensitivity

  • < 1 % of Full Scale

Viscosity

  • 21 mm²/sec, Max.

show more