Images are representations only.
6012 3/2-Way Mini Solenoid Valve
Brand: Burkert Fluid Control SystemsDoes not ship to OH, United States
Type 6012 is used for blocking, dosing, filling and ventilating neutral gases and liquids, in particular for the control of single-acting pneumatic actuators or for technical vacuum.
The modular valve may be mounted singly or in block assembly on a multiple manifold.
Features- Direct-acting
- psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10)
- DN 1.2 to 1.6 mm
- M5, G1/8", sub-base
- 0.826" (21 mm) coil spacing when mounted on manifold
Specifications
Ambient Temperature Range
- Maximum
BSP Connection
- G 1/8" Female
Cable Material
- Cable Plug: Polyamide (PA)
Consumption
- Power Consumption (Hold): 6 VA (4 W)
- Power Consumption (Inrush): 4 W
- Power Consumption (Inrush): 9 VA
Duty Cycle
- Duty Cycle / Single Valve for Block Assembly on Multiple Manifold: 100 % Continuous Rating Intermittent Operation 60 % (30 minutes) with 2 W Coil 100 %
Electrical Connectors
- According to DIN 43650 Form B (Industrial Standard) for Cable Plug Typical 2507
- According to DIN EN 175301-803 Form C for Cable Plug Typical 2506
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure, Body Material
- 303 Stainless Steel, 1.4305
- Brass
- Polyamide (PA)
Environmental Protection
- IP65 with Cable Plug
Flow Rate
- Water: 0.045 to 0.060 Kv (m³/hour)
Materials of Construction
- Coil (DIN EN 175301-803) Form B (Industrial Standard): Epoxy
- Coil (DIN EN 175301-803) Form C: Polyamide (PA)
- Guide Tube: 305 Stainless Steel, 1.4303
- Stopper, Core: 430FR Stainless Steel (1.4105)
- Sub-Base: Nickel-Plated Surface - Stainless Steel Version
- Sub-Base: Zinc Surface (Zn3 Gl CC) - Brass Version
Media
- Neutral Gases & Liquids (Compressed Air, Water, Hydraulic Oil, Technical Vacuum)
Metric Connection
- M5 Male
Mounting
- Manifold
Mounting Position
- Preferably with Actuator Upright
O-Ring Material
- FKM
Operating Voltages
- 24 Vdc
- 24-230 V / 50 Hz
Orifice Size
- 0.047" to 0.062" (1.2 to 1.6 mm)
Override
- Manual Override
Power
- Coil Power (AC or DC): 4 W
Pressure Range
- psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10)
Process Temperature
- -10° to 100° C (14° to 212° F)
Response Time
- Closing: 9 to 12 ms (Pressure Relief 100 to 10 %)
- Opening: 7 to 12 ms (Pressure Build-Up 0 to 90 %)
Ring Material
- Shading Ring: Copper
- Shading Ring: Silver
Seat / Seal Material
- Armature Seal: FKM
- Flat Seal: NBR
Solenoid Type
- 3/2-Way
Spring Material
- 301 Stainless Steel, 1.4310
Tolerance
- Voltage Tolerance: ± 10 %