Images are representations only.
300 Direct-Acting 3/2-Way Miniature Solenoid Valve
Brand: Burkert Fluid Control Systems
Type 300 is available in a variety of different circuit functions, to suit the respective application.
When energized, the solenoid armature is drawn against a spring. The flow path through the valve is dependent upon the chosen circuit function.
The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.
Features- Body materials: brass, stainless steel
- Short response times
- Compact design
- When de-energized, outlet port exhausted or pressurized, mixer valve
Specifications
Actuator Type
- Direct-Acting
Ambient Temperature Range
- Maximum
Applications
- Gas Control, Welding Technology
- Neutral Gases & Liquids
- Pneumatic Control Equipment
- Shut-Off, Dosing, Filling & Ventilating
- Small Scale Instruments, Laboratory & Measuring Technology
- Vacuum
BSP Connection
- G 1/8” Female
Consumption
- Power Consumption (AC Hold): 6 VA / 4 W
- Power Consumption (AC Inrush): 9 VA
- Power Consumption (DC): 4 W
Cycling Rate
- 0 to 1,000 cycles/minute - Actuator
Duty Cycle
- 100 % Continuous Rating, for Multiple Assembly Reduced Duty Cycle or Use 2 W Version on Request - Actuator
Electrical Connectors
- Plug Connection without Cable Plug
Enclosure, Body Material
- 303 Stainless Steel, 1.4305
- Brass
Environmental Protection
- With Cable Plug & Cable: IP65 - Actuator
Flow Rate
- Air: 48 to 65 QNn (L/min) [Measured with bar: 6 Upstream Pressure & bar: 1 Pressure Drop Across the Valve at 20° C (68° F)]
- Water: 0.045 to 0.060 Kv (m³/hour)
Metric Connection
- M5
Mounting
- Manifold
Mounting Position
- Preferably with Solenoid System Upright
Operating Voltages
- 12-24 Vdc
- 24-240 V / 50 Hz
- Battery Voltage: 24 V
Orifice Size
- 0.047” to 0.062” (1.2 to 1.6 mm)
Pressure Range
- psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10) [Also Suitable for Vacuum]
Response Time
- Closing: 8 milliseconds
- Opening: 12 milliseconds
Seat / Seal Material
- Seal: EPDM (Fluids Handled: Oils & Fat-Free Fluids, Hot Water Alkaline Washing & Bleaching Lyes) - Valve
- Seal: fpm (Fluids Handled: Hot Air, Oxygen, Per-Solutions, Hot Oils with Additves) - Valve
- Seal: NBR (Fluids Handled: Neutral Fluids, Compressed Air, Town Gas, Water, Hydraulic Oil, Oils & Fat without Additives) - Valve
- Seat: Brass
Solenoid Type
- 3/2-Way
Temperature Range
- EPDM: -40° to 90° C (-40° to 194° F)
- FPM: -10° to 100° C (14° to 212° F)
- NBR: -10° to 90° C (14° to 194° F)
Tolerance
- Voltage Tolerance: ± 10 % - Actuator
Viscosity
- Maximum
- Neutral gases and liquids
- Pneumatic control equipment
- Vacuum
- Shut-off, dosing, filling and ventilating
- Gas control, welding technology
- Small-scale instruments, laboratory and measuring technology